How To Remove An Oil Filter Without A Wrench

Frequently, oil filters get stuck, making them extremely hard to unscrew by hand. This usually happens either because people do non oil the gasket earlier installation or considering they over tighten the oil filter when installing it. Either mode, hither are iii recommendations on how to remove a stuck oil filter if you find yourself dealing with a stubborn filter in the future.

How To Remove A Stuck Oil Filter

1. Endeavour to Unscrew The Filter past Paw

First, you lot will want to attempt loosening the oil filter by hand. Make sure that your hands are not oily or glace and that you can get a firm grip on the stuck oil filter. Yous tin can wear gloves with a non-slip grip to get a better hold on the oil filter. As e'er, be careful with hot filters, and remember to always turn the filter to the left to unscrew it.

ii. Utilize a Specific Tool to Unscrew The Filter

If your filter is stuck and you can non unscrew information technology by manus, you may need a specific oil filter wrench or oil filter cap to remove it. A few additional tools that might piece of work are adjustable oil wrench pliers, concatenation wrenches, ring wrenches, or jaw wrenches.

Using your tool of choice, you lot should exist able to go a good grip on the filter to unscrew information technology. Be careful about crushing the cylinder depending on the method and tool you lot are using. Note that you will demand to apply a decent corporeality of torque to brand whatever headway with a really stuck filter.

3. Apply a Screwdriver And Hammer

If none of the above works, as a last resort yous can utilise a screwdriver and a hammer. Though less than ideal, this method is usually constructive; only be aware that it is messy. Using the screwdriver (preferably an old 1 that you lot aren't attached to), make a hole in the back of the filter body by hitting the screwdriver in with a hammer. Once the screwdriver pierces the metal canister from one side to the other, you should be able to use it equally a handle to rotate and remove the filter.

Avert Future Stuck Oil Filters

Of course, once you lot accept figured out how to remove a stuck oil filter, y'all don't want to cause the same trouble again. Be sure you appropriately install your new oil filter. Don't skip over the step of lubricating the gasket with a low-cal layer of fresh oil. And brand sure you don't overtighten the new filter. Information technology should fit snugly upwardly to the engine block, merely y'all don't need to crank information technology tight.